アレクサンドル・スドルギン

Premiere Panel

このアプリは、Hub by Sudorginでインストールとアップデートを行います。別途ダウンロードする必要はありません。

Hub by Sudorginでインストール

  1. バージョン1.9.0

    最新2026

    修正

    • Flash Frames on a shortcut: when the search found flashes and placed markers, Cortex and Synapse reported a failure. Now it counts as done.
    • Collapse Selected: when another clip is in the way, the hint now names that clip, its track and timecode. The sound of a cut clip no longer stays behind while its picture moves.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  2. バージョン1.8.0

    2026

    修正

    • In a narrow column panel the hint after a failure was not visible at all — the buttons took the whole height, so it looked like nothing happened. Now the hint shows as a card over the buttons; click it to dismiss.
    • When Premiere will not create an adjustment layer, the hint is now short: "The project needs at least one Adjustment Layer created by hand".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  3. バージョン1.7.0

    2026

    追加

    • Shortcuts for the buttons — with Cortex or Synapse. A new keyboard button in the header opens the Shortcuts tab: give any of the seven buttons and their four Alt variants a shortcut of its own.
    • Press it and the button runs as if clicked, on the timeline and in the panel itself; during Flash Frames the shortcut stops the search. Without Cortex or Synapse the tab tells you where to get them; the panel itself stays free.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  4. バージョン1.6.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  5. バージョン1.5.0

    2026

    追加

    • New Flash Frames button with a lightning bolt: finds 1–3 frames of another shot at cuts and puts a FLASH marker on them — how many frames, and at the start or end of the clip. Does not change the edit. While it runs, the same button stops it; Alt+click removes FLASH markers.
    • Flash Frames looks only at the cuts that need it: the selected clips or the part between In and Out; cuts checked earlier and unchanged since are skipped, and so are titles, graphics and a cut in the middle of one piece of video. After Stop it picks up where it left off.
    • Before a long search it says how many minutes it will take and waits for a second click. Alt+click removes FLASH markers so everything is checked again.

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.
    • Alt+click on Timeline Check removes only its own markers; FLASH markers stay.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  6. バージョン1.4.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  7. バージョン1.3.0

    2026

    追加

    • The panel can lie as a horizontal strip: in a short frame the six buttons line up in one row, with only "?" on the left and the status line on the right.
    • In a narrow, tall column the panel takes minimal space: only "?" on top and the six buttons stacked, with no empty space in the corner; nothing is cut off on the right in the narrowest column.

    変更

    • Expand Nested Sequence no longer removes the nested sequence — its contents go onto free tracks above it, and the nested sequence itself is disabled (Shift+E enables it). Clips no longer jump several tracks up. If there are not enough tracks, the panel adds new ones on top.
    • If the second audio channel inside the nested sequence is cut differently from the first, or another sound sits on its track, Expand Nested Sequence refuses and explains what to fix: before, the first mic could come out in place of the second.
    • If the nested sequence's audio is trimmed differently from its video (a J or L cut), Expand Nested Sequence refuses and explains what to do: before, part of the audio could be lost.

    修正

    • If Expand Nested Sequence fails after Premiere has added tracks, the panel says how many were added: a script cannot delete empty tracks.
    • A sped-up or slowed-down clip from the middle of a long file comes out showing the same frames it showed inside the nested sequence.
    • If there is a title or graphic inside the nested sequence, the panel now says so — it used to wrongly blame the clip's speed.
    • A clip with keyframes now comes out of the nested sequence even when its speed is changed or the nested sequence trimmed its start: the motion is the same and on the same frames that were visible inside.
    • Two-channel audio at a changed speed now comes out of the nested sequence with both channels.
    • Video and audio are linked again after Expand Nested Sequence.
    • A fade at the edge of a clip inside the nested sequence becomes a smooth fade in or out.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  8. バージョン1.2.0

    2026

    修正

    • Staircase no longer refuses with "not enough tracks" when two or more tracks have to be added: the panel adds as many as it needs.
    • Staircase now lays clips out in tiers, camera by camera: first clips stay, second clips go one tier up, third clips one more, each right above its own track, and the audio moves the same way. A clip joins the tier of the other cameras' clips playing at the same time.
    • Titles and sound effect tracks stay where they are. The camera order stays the same. Undo Staircase returns each clip and its audio to its own track, including after Clip → Synchronize; if that track is taken, the clip goes higher up, never onto another camera's track.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  9. バージョン1.1.0

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.

    変更

    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.
    • Labels and tooltips rewritten in plain language and made shorter: for example, "Unknown result" is now "Panel did not understand Premiere's response" with advice on what to do, and messages say "nested sequence" instead of "Nest".
    • The panel's right-click menu has plain item names: Refresh Panel, Restart Panel.
    • The panel header now reads "Premiere Panel by A.Sudorgin v<version>": the full version number instead of a single digit, and the signature matches the other plugins.
    • The ≡ button with an empty settings sheet: the panel has no settings yet.

    修正

    • The "?" menu: "Version History" without Hub by Sudorgin opens the Premiere Panel page in the panel's language instead of the home page; "Support" opens the contacts page on the site.
    • In the "could not check" message two sentences ran together without a space.
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer. The panel code in the release is now obfuscated.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  10. バージョン1.0.0

    2026

    追加

    • The first version of Premiere Panel — six buttons for timeline chores: an adjustment layer over the selection, closing gaps between selected clips without shifting the sequence, Staircase for syncing cameras by sound, Undo Staircase, expanding a nested sequence with effects, and a pre-export check.
    • Below the buttons, a result line says what was done, or, on refusal, what is in the way and what to do.
    • A "?" button in the header: report a bug (with your email and the panel log), version history, support and plugin info. The error window has a Send Report button.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

全プラグインのアップデート 不具合を見つけましたか？