アレクサンドル・スドルギン

すべてのプラグインの全リリースを、新しい順に表示します。

  1. Guillotine 2.3.0

    最新2026

    追加

    • The panel now installs and updates its sound analysis module by itself: on opening it checks whether the module is current and, if the website has a newer one or it is missing, downloads it (about 2.2 GB) and installs it with no Windows dialogs.
    • Above the steps you see "Updating the sound analysis module · N %" with a bar; Stop cancels the download, and the next opening starts over. With no connection to the website, the panel keeps working with the installed module if it is 1.1.1 or newer.

    修正

    • Opening another sequence in Premiere during the analysis no longer stops the cut with "choose the track again": the panel switches back to the sequence it analyzed and cuts that one. If it cannot switch back (the sequence was deleted), the panel says so, names it, and no minutes are spent.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  2. Premiere Panel 1.9.0

    最新2026

    修正

    • Flash Frames on a shortcut: when the search found flashes and placed markers, Cortex and Synapse reported a failure. Now it counts as done.
    • Collapse Selected: when another clip is in the way, the hint now names that clip, its track and timecode. The sound of a cut clip no longer stays behind while its picture moves.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  3. CutFixer 2.9.0

    最新2026

    修正

    • The "DEMO" mark no longer shows up for a buyer who hasn't opened Premiere for a week: the purchase is confirmed when Premiere starts, before the first frame.
    • Exporting with a hundred transitions no longer runs out of graphics card memory: each transition takes memory for a frame and gives it back right away instead of holding it for every cut.

  4. RGB Panel 1.8.0

    最新2026

    変更

    • Internal panel modules that future updates rely on were refreshed; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  5. SFX Machine 2.2.0

    最新2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  6. Retimer 3.0.0

    最新2026

    修正

    • The "DEMO" mark no longer shows up for a buyer who hasn't opened Premiere for a week: the purchase is confirmed when Premiere starts, before the first frame.
    • Exporting with many slowed-down clips no longer runs out of graphics card memory: the effect takes memory for a frame and gives it back right away instead of holding it for every clip.

  7. Binder 1.7.0

    最新2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  8. Hub by Sudorgin 2.7.0

    最新2026

    変更

    • When only the engine of Guillotine or Centurion is out of date, the hub shows "Update" for the panel. In "Updates" it's an "Update engine to …" line, and "Update All" picks it up too. The engine installs on its own, with no Windows dialogs.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  9. Guillotine 2.2.0

    2026

    修正

    • Cutting now works on sequences with a fractional frame rate (23.976, 29.97, 59.94 and a phone's 24.003): Premiere 26.5 no longer refuses the cut command.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  10. SFX Machine 2.1.0

    2026

    修正

    • A pad holding a very short sound (a click, a key tap) could put the neighbouring, silent piece of the file on the timeline. It now places exactly the piece the pad holds.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  11. Hub by Sudorgin 2.6.0

    2026

    修正

    • The install window no longer says "Couldn't install … error 1" when the effect did get installed. If an open Adobe program really blocks the install, the window and the hub name it: "Close Adobe Media Encoder and press the button in the hub again."
    • "Reinstall" for Guillotine and Centurion now reinstalls their audio analysis module too. If the module file has gone missing (for example, removed by an antivirus), the hub notices and installs it again.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  12. CutFixer 2.8.0

    2026

    修正

    • Works in Premiere Pro 2024: the transition shows up in the list, and Premiere 2024 no longer crashes on start-up.

  13. Retimer 2.9.0

    2026

    修正

    • Works in Premiere Pro 2024: the effect shows up in the list, and Premiere 2024 no longer crashes on start-up.

  14. DaVinci WSF 1.5.0

    最新2026

    変更

    • During the trial the app tells the site once a day that it was launched — just that and the day; a line under the trial button in the key window says so.
    • "Buy" opens the same page, tagged as coming from the plugin.

  15. Guillotine 2.1.0

    2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  16. SFX Machine 2.0.0

    2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  17. Binder 1.6.0

    2026

    変更

    • During the trial the app tells the site once a day that it was launched — just that and the day; a line under the trial button in the key window says so.
    • "Buy Key" opens the same page, tagged as coming from the plugin.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  18. Hub by Sudorgin 2.5.0

    2026

    追加

    • Each paid plugin now shows a short line under its name saying what it does: "Binder — Project organizer", "Retimer — Next-level slow motion", and so on.

    修正

    • Free programs no longer show an empty green frame next to the version; it looked like a place for a key.
    • Previews in the "Effects" tab no longer flash when you switch to the tab: a dark square first, then the before/after slider right away.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  19. RGB Panel 1.7.0

    2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  20. Premiere Panel 1.8.0

    2026

    修正

    • In a narrow column panel the hint after a failure was not visible at all — the buttons took the whole height, so it looked like nothing happened. Now the hint shows as a card over the buttons; click it to dismiss.
    • When Premiere will not create an adjustment layer, the hint is now short: "The project needs at least one Adjustment Layer created by hand".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  21. Hub by Sudorgin 2.4.0

    2026

    追加

    • The "Soon" tab now has Synapse: shortcuts for our plugins, running in the background with no window of its own. It installs with a closed-beta key; it comes along with Cortex, and a Cortex key unlocks its shortcuts too.

    変更

    • The command palette is now called Cortex in the Hub.
    • Internal developer notes in the code were updated; nothing changes in how the Hub works for you.
    • The product window with a trial shows a line: during the trial the app tells the site whether it was launched — just that and the day.
    • "Buy Key" opens the same page, tagged as coming from the plugin.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  22. Premiere Panel 1.7.0

    2026

    追加

    • Shortcuts for the buttons — with Cortex or Synapse. A new keyboard button in the header opens the Shortcuts tab: give any of the seven buttons and their four Alt variants a shortcut of its own.
    • Press it and the button runs as if clicked, on the timeline and in the panel itself; during Flash Frames the shortcut stops the search. Without Cortex or Synapse the tab tells you where to get them; the panel itself stays free.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  23. SFX Machine 1.9.0

    2026

    追加

    • Pad shortcuts — with Cortex or Synapse. The keyboard button in the header and the "Shortcut…" item on a pad: assign a key and pressing it puts the sound on the timeline, just like clicking the pad. Without Cortex or Synapse the sheet shows where to get a trial or a key — the "Open Hub" button.

    変更

    • Internal developer notes in the code were updated; nothing changes in how the panel works for you.
    • During the trial the app tells the site once a day that it was launched — just that and the day; a line under the trial button in the key window says so.
    • "Buy Key" opens the same page, tagged as coming from the plugin.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  24. Guillotine 2.0.0

    2026

    変更

    • "Plans" opens the same page, tagged as coming from the plugin.
    • Five tips now say what the panel does: Count Who Speaks no longer promises a transcript, the lead before a line is 0.25 s, Who Speaks is about cameras and tracks, and Breaths and "Um" and Pauses Only in Dialogue describe what actually happens.

    修正

    • With First 5 Minutes Only checked, hours are charged only for those 5 minutes (adjusted for the mode), not for the whole recording: the model analyses only them.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  25. Guillotine 1.9.0

    2026

    変更

    • Updated the API.
    • Short format picks the strongest moments of the whole recording the way editors do: it weighs every option found, not just the ones that agreed, and more often builds a clip from different parts of the recording.

    修正

    • If the cut fails after the analysis, the minutes for the analysis go back to your balance. And if Premiere will not let the sequence be cut, the panel says so before the analysis, and no minutes are spent at all.
    • If the cut cannot start, the extra sequence copy no longer stays in the project.
    • Audio analysis without an NVIDIA graphics card no longer stops when the computer is low on memory: it keeps going more slowly but finishes.
    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  26. SFX Machine 1.8.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  27. Binder 1.5.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  28. Hub by Sudorgin 2.3.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  29. RGB Panel 1.6.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  30. Premiere Panel 1.6.0

    2026

    修正

    • Crash reports reach us again. After the update the panel also sends, once, an earlier report that did not get through.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  31. Hub by Sudorgin 2.2.0

    2026

    変更

    • Sign-in is no longer hidden in the "?" menu. If you are not signed in, Hub by Sudorgin offers "Sign in to your account" right when it opens; you can sign in or press "Not Now".
    • A "Sign In" button is always visible in the header corner, and after you sign in it becomes a circle with the first letter of your email that leads to your keys and "Sign Out".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  32. DaVinci WSF 1.4.0

    2026

    追加

    • Sign in to your sudorgin.pro account right from the key window: the app shows a code, you click “Yes” in the browser, and that's it. You sign in once per computer to try or buy; the trial is tied to your email, and the key from your account is entered by itself — no need to copy it from the email.
    • After “Buy” the key window waits for the payment and enters the bought key by itself. If the key is on another computer, the app offers to move it here. “Sign Out” removes only the sign-in — the key stays.

    変更

    • A key you bought earlier can still be entered by hand and works as before — no sign-in needed for that.
    • The developer build setup was updated; nothing changes in how DaVinci WSF works for you.

  33. Hub by Sudorgin 2.1.0

    2026

    追加

    • Sign in to your sudorgin.pro account: "Sign In" opens your regular browser with the same code as in Hub by Sudorgin; press Yes there. The showcase is visible without signing in, while "Try", "Install" and "Buy" ask you to sign in once and then continue on their own.
    • "My Keys" is now "Account": your email at the top, "Sign Out", and below it your keys and manual key entry as before. Installed programs open, update and switch off without signing in, as before.
    • After you sign in, Hub by Sudorgin puts your account keys on installed programs by itself, and if a key is on another computer right now, it asks "Move it here?". It opens the card of the program you came for from the site and highlights its button.
    • "Buy" opens checkout, and the key you bought is put in place by itself: "Done, … is yours". Free programs of your account are marked "yours". The "Report a Problem" form already has your email filled in; you can erase it.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  34. Hub by Sudorgin 2.0.0

    2026

    変更

    • New version number 2.0: this is the same version released as 1.10, now numbered correctly after 1.9. Nothing changes in how the Hub works.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  35. Hub by Sudorgin 1.10.0

    2026

    追加

    • Plug-ins in closed testing on the Soon tab install with a key from the author: use the I Have a Key button.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  36. Retimer 2.8.0

    2026

    修正

    • Slow motion is now smooth during playback too, not only when paused.

  37. CutFixer 2.7.0

    2026

    修正

    • The morph now shows during playback too, not only when paused.

  38. CutFixer 2.6.0

    2026

    追加

    • Works on AMD graphics cards: the transition frame is computed on the graphics card, not on the processor.

    修正

    • CutFixer no longer crashes a 4K export when the computer runs short of memory: at such moments the transition falls back to a plain dissolve and the export runs to the end.

  39. Retimer 2.7.0

    2026

    追加

    • Works on AMD graphics cards: the slow-motion frame is computed on the graphics card, not on the processor.

    修正

    • When the computer runs short of memory, Retimer can no longer crash Premiere during an export.

  40. Guillotine 1.8.1

    2026

    修正

    • If a track turns out to be locked right before cutting, the message names it and says your sequence is untouched.
    • The progress under the steps no longer blinks between the model analysis and cutting.
    • If cutting a conversation fails, a retry goes straight to cutting with the model analysis already done: hours are not charged twice — on the "first N minutes" trial too, and after closing the panel or Premiere. The failure message is no longer replaced by the model's note.
    • If transcription runs without a GPU, a note next to Stop says "running without a GPU — will take longer, about N min", and the time left is counted for the processor.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  41. Guillotine 1.8.0

    2026

    修正

    • A locked track with clips is caught the moment you press the button, not after an hour of analysis: the panel names the track and does not start until it is unlocked.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  42. Guillotine 1.7.2

    2026

    修正

    • Stop now halts the analysis on the server too, not just in the panel: you can start another recording right after Stop without getting "busy".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  43. Guillotine 1.6.0

    2026

    変更

    • Editing progress now shows the time for each step: "~12 min" on the running one and on the ones waiting. If a step takes longer than promised, it says "soon" and the fill keeps creeping forward. The Model Analysis tile has three dots: reading → outline → edit.
    • The bottom bar and the line next to Stop are gone.
    • The first estimate now takes your computer into account: without an NVIDIA card, sound analysis is estimated from the number of processor cores, not from a graphics card, and is corrected by the real speed after half a minute.
    • If the model analysis fails, the panel no longer retries it again and again on its own; it says: "The analysis did not go through. Try again later — the work done so far is kept."

    修正

    • Shorts from a long recording no longer stop after 20 minutes: the panel waits for the answer up to 3 hours.
    • Analysing a long recording in Monologue and Dialogue no longer hangs at 80%: the wait is estimated as 15 minutes per hour of recording, and the progress goes all the way. The panel waits for the answer up to 3 hours instead of 35 minutes.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  44. Guillotine 1.5.0

    2026

    追加

    • Speakers can be given names, and a camera can show several speakers or everyone; the progress shows track k of N.
    • After Monologue and Dialogue, next to "All Done" you see how much was cut and what: "Cut 18 min of 42: retakes 7, abandoned phrases 3".
    • A recording longer than your trial minutes is no longer refused: the panel offers "Edit the first 30 min" — it analyses and cuts only the beginning, the rest of the recording stays as it was, and only those minutes are spent. Shorts are picked from the same first minutes.

    変更

    • Monologue now cuts with a new model: retakes across the whole recording, slips and junk. The model looks at a recording of up to 4 hours as a whole, and while it thinks, the line below shows what it is working on: "model is thinking: outline · 0:00–43:05", then "edit".
    • After editing, next to "All Done" you see what was removed and why.
    • Monologue on two cameras: the camera switches on splices and hides the jump, and inside a long piece only in a pause between words, never mid-word. No more shots shorter than a second and a half and no slivers left on the top track.
    • The same number in "no more often" and "no less often" (for example, 6 and 6) is a rough rhythm, not a switch exactly by the clock.
    • On computers without an NVIDIA card (including AMD or Intel graphics), speech recognition now uses the whole processor instead of half of it and runs 1.7–2.5 times faster: engine 1.1.0 works on several pieces of the recording at once. The text is the same. Nothing changes on NVIDIA cards.
    • The panel remembers the cameras picked for mixing and the "no more often / no less often" numbers between launches.
    • Under the progress on every tab there is now one overall bar and a line like "about 12 min left", so you can see how long you can step away. The estimate is refined as work goes and remembers how fast your computer is.
    • A stage's bar no longer drops to zero on every sub-step and no longer stands still while the model analyses the first part.
    • There is no more Standard / Strong model choice: paid hours always use the strong scheme, which catches re-shot takes and cleans up small slips. An hour of dialogue uses an hour and a half.
    • The free part is now the first 30 minutes on the same strong scheme as paid hours, once per computer, instead of an hour a month. The button in the key window, the line next to the button and the hours panel say so: "Trial: 30 min".
    • If this month's trials have run out, the panel says the pass will use a lighter model.
    • Dialogue and Short Videos on paid hours now use the same strong scheme as Monologue. Dialogue gives the model the whole conversation instead of chunks: guests' lines no longer go missing at the seams, and while the model thinks, the line below shows what it is working on, just like Monologue.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  45. CutFixer 2.5.0

    2026

    修正

    • The transition keeps the picture in place when the clip size differs from the sequence size (for example 4K clips in a 600×600 sequence).

  46. Retimer 2.6.0

    2026

    修正

    • The picture no longer slides into the corner when the clip size differs from the sequence size (for example a 4K clip in a 600×600 sequence): the clip stays where it stands without Retimer.
    • A clip whose frame rate differs from the sequence (for example 24 or 23.976 fps in a 50 fps sequence) now slows down smoothly, without freezes or skipped frames.

  47. SFX Machine 1.7.0

    2026

    変更

    • Each project now has its own pads. A new project opens with an empty grid and no longer pulls in sounds from the previous one; a project you already used the panel in opens with its own pads. Save As carries the pads over to the new copy. Panel settings stay shared.
    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    修正

    • A cycle pad no longer starts over from the first sound when you switch to another tab and come back: each tab remembers which sound played last.
    • Volume set with Audio Gain (the G key) is now taken into account when you capture a sound into a pad: the pad remembers Audio Gain together with Volume > Level, and the sound is inserted as loud as it was on the timeline.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  48. Binder 1.4.0

    2026

    変更

    • The Auto-sort, via Incoming, Everything new in the root and Open folder after render checkboxes and the minutes are now kept per project. A new project starts with everything off and nothing connected; go back to an earlier project and Binder carries on there with its own settings.
    • Projects where Binder was already working keep their checkboxes as they were.
    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  49. Hub by Sudorgin 1.9.0

    2026

    追加

    • Retimer and CutFixer cards now show a before/after video: drag the slider to compare.

    変更

    • Internal developer diagnostics were updated; nothing changes in how the Hub works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  50. RGB Panel 1.5.0

    2026

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  51. Premiere Panel 1.5.0

    2026

    追加

    • New Flash Frames button with a lightning bolt: finds 1–3 frames of another shot at cuts and puts a FLASH marker on them — how many frames, and at the start or end of the clip. Does not change the edit. While it runs, the same button stops it; Alt+click removes FLASH markers.
    • Flash Frames looks only at the cuts that need it: the selected clips or the part between In and Out; cuts checked earlier and unchanged since are skipped, and so are titles, graphics and a cut in the middle of one piece of video. After Stop it picks up where it left off.
    • Before a long search it says how many minutes it will take and waits for a second click. Alt+click removes FLASH markers so everything is checked again.

    変更

    • Internal developer diagnostics were updated; nothing changes in how the panel works for you.
    • Alt+click on Timeline Check removes only its own markers; FLASH markers stay.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  52. CutFixer 2.4.0

    2026

    追加

    • If Premiere crashes because of the transition, a short crash note is left on the computer. Attach it to a bug report and the cause is found faster. Premiere itself behaves as usual.

    変更

    • Updated the engine code shared with Retimer; transitions work as before.
    • With the Hub installed, the crash snapshot is taken from outside by a separate program: Premiere does not freeze while it is written, and the snapshot is more complete.

  53. Retimer 2.5.0

    2026

    追加

    • If Premiere crashes because of Retimer, a short crash note (where, on which frame, with which settings) is left on the computer. Attach it to a bug report and the cause is found faster. Premiere itself behaves as usual.

    変更

    • With the Hub installed, the crash snapshot is taken from outside by a separate program: Premiere does not freeze while it is written, and the snapshot is more complete.

  54. DaVinci WSF 1.3.0

    2026

    変更

    • The app log now records what you did: which setting you changed (was → now) and, once a minute, a short scrolling summary. Problem reports become clearer; your key and email never go into the log.

  55. Guillotine 1.4.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  56. SFX Machine 1.6.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.
    • The "Grab with Effects" button is gone: the pad takes the clip's effects by itself however you grab the sound from the timeline — with "Grab from Timeline", a click on an empty pad or a drag. A sound without effects is grabbed as before.
    • A pad "with effects" places a plain sound with its waveform and puts the same effects with the same settings on it — no nested sequence. If your Premiere does not have an effect, the sound still goes in and the panel names that effect.
    • Pads "with effects" made in version 1.5.0 need to be grabbed again: pressing such a pad places nothing and asks you to do so. Sound taken from a video file goes in without its picture — the video under it stays untouched.
    • If a video file's sound is recorded as separate channels, the panel places nothing and suggests making the file stereo — the track next to it is not overwritten.

    修正

    • You can press "Diversify" as many times as you like: each press makes a new variant of the original sound. Before, the sound grew longer and slower with every press and an empty tail appeared after it. "Restore" now brings the sound back to what it was before the first press.
    • If Premiere does not accept the new speed of a sound, "Diversify" no longer changes its length and names that sound in the message.
    • Pressing "Diversify" again with pitch no longer adds a second and third Pitch Shifter to the sound.
    • Grabbing a sound with effects no longer touches your sequence: no In and Out points, no other sequence on screen, no extra sequences in the project. The pad remembers the sound itself and its effects with all their settings, even VST. The pad says "with effects".
    • A layer with an Onset Point marker now goes in whole. Before, two sounds placed back to back could fail to go in together: the panel said "Inserted 1 of 2 — the track is taken".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  57. Binder 1.3.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  58. Hub by Sudorgin 1.8.0

    2026

    追加

    • Clicking Update to X in Hub in a panel now opens Hub by Sudorgin right on the Updates list: it asks the site again and highlights that panel's row; the update installs only when you click Update.
    • A report about any product now carries crash details: when Premiere crashed or froze, whether the graphics driver was reset, which third-party plug-ins are loaded. Names and personal paths are removed.
    • If Premiere crashed on our effect or froze, the report carries the crash dump: it shows where our code broke.
    • Next to Help in the header there is now an envelope, Send Report: one click and the Hub by Sudorgin report is sent, no email or text needed. After an error a red dot lights up on it.

    変更

    • If the site does not respond to Check for Updates, Hub by Sudorgin now says so and shows the date of the list on screen.
    • Report a Problem now has a single Send button; email and text are optional.
    • The "site is not responding" line now also appears on its own when Hub by Sudorgin opens, not only after Check for Updates.
    • When the site does not respond — a report was not sent, version history did not load, a key was not checked — Hub by Sudorgin says the connection to the site failed.

    修正

    • The red Panel errors triangle no longer lights up when Premiere closed on its own while a panel was open.
    • A line appears only if Premiere closed or stopped responding right after you pressed a panel button or while our effect was working, and it reads plainly: “Premiere closed after you pressed “Sort” in Binder”.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  59. RGB Panel 1.4.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  60. Premiere Panel 1.4.0

    2026

    追加

    • Errors and crashes are sent automatically: an error window, a button that failed or a Premiere crash goes to the developer on its own, no need to press anything. A short note is sent, without your email; after a crash the crash dump goes too, and it may contain part of the open project.
    • If Premiere crashed or froze, the report says when it happened and what the panel was doing, and carries the crash dump.
    • Next to "?" in the header there is now an envelope, Send Report: one click and the report is sent, no email or text needed. After an error a red dot lights up on it. In the error window the main button is Send Report, also one click.
    • After Premiere crashes, the panel offers once, on the next start, to send a report — with one click.
    • When a new version is out on the website, a yellow dot lights up on "?". Hover to see the version number; the first line of the "?" menu, "Update to … in Hub", opens Hub, and Hub installs the update.

    変更

    • In Report a Problem, email and text are now optional; Show What Will Be Sent is gone.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  61. Guillotine 1.3.0

    2026

    変更

    • Dialogue: the recording is transcribed once — when you press Edit. Count Who Speaks only finds who speaks where, Next opens Pauses right away, and the pause and camera settings can be set without waiting. How much gets removed and how many shots there are is shown after the edit.
    • Pauses Only mode — in both Monologue and Dialogue — no longer spends hours: cutting without the model is free. A key is still required; only model analysis spends hours.
    • Dialogue now cuts like an editor: video only where the shot changes, at one point on all cameras; audio — each microphone only where it switches on or off. No idle cuts, and the edit in Premiere runs several times faster.
    • Dialogue: the room microphone is switched off entirely when the speakers have their own microphones. It stays on only if there is one speaker microphone or none — then the other person can be heard only through the room microphone.

    修正

    • In Dialogue, the camera again switches to the wide shot at least as often as set, even when one person talks without pauses.
    • In Dialogue, a listener's microphone no longer switches on in pieces while someone else is talking: the neighbour's words picked up by their microphone no longer count as their speech. Their remarks and longer laughter over someone else's story are still heard.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  62. Retimer 2.4.0

    2026

    変更

    • The speed field is now called "Nested clip speed % (0 = auto)": on a slowed clip Retimer takes the clip's own speed, and the field only matters when the slowed clip is nested.

    修正

    • Retimer placed directly on a slowed clip no longer hands frames back repeated: it fills in every in-between frame from the neighbouring source frames, at any speed and with a trimmed start. The clip no longer needs to be nested for this.

  63. DaVinci WSF 1.2.1

    2026

    変更

    • New icon: three glowing DaVinci circles with a mouse wheel — in the tray, on the taskbar and in the app window.
    • The list of programs where smooth scrolling works is back in the settings: add your own or remove one.
    • Wheel step and Duration are back in the settings, and the speed-up has Quiet start and Full speed at swing again. Your numbers there are kept and no longer reset on start.

    修正

    • Wheel zoom moves from the first swings again: in 1.2.0 the first swings were so quiet that Resolve did not move the zoom until the third swing and then jumped. Now the first swing is the plain step, as before the speed-up, and it only gets faster and smoother from there.
    • The new start applies to everyone who updates.
    • The Language box in the settings showed an internal word instead of the language name, and some labels and the status line were cut off — now everything shows in full.

  64. SFX Machine 1.5.0

    2026

    追加

    • The pad window has a new "Grab with Effects" button: the pad takes the selected sound or sounds as a nested sequence (Nest) together with all their effects, even VST with their settings. One clip is enough.
    • Pressing the pad puts only the sound of that sequence on the timeline — it sounds like the original; it has no picture, the video under it stays untouched, and the clip is green like Premiere's own nested sound. The In and Out points on your sequence stay as they were after the grab.
    • A "with effects" pad works in any project: where its sequence is missing, pressing the pad brings the sequence into the SFX Machine bin and places the sound. Pressing it again does not make a second copy.

    変更

    • In a "cycle" pad window the Onset Point strip now shows every sound of the folder in a row, each with its own marker: drag the marker on a sound to set it for that sound, "to loudest" gives each sound its own loudest spot, and "reset" clears the markers on all of them.
    • Each sound from the queue now lands on the playhead by its own marker.
    • In a layer pad window the Onset Point strip now shows the whole layer: every sound as a colored layer at its own place, as it lay on the timeline. A layer has one marker, dragged within the first sound — the whole layer lands by it.

    修正

    • A layer where a sped-up sound and another sound sit one after the other on the same track no longer refuses with "everything is occupied" on an empty timeline. If such a layer really lacks room because of the speed change, the panel names the sound and says what to change.
    • If Premiere does not set the speed of a layer sound and it takes the next sound's place, the panel says exactly that instead of "track is occupied".

    対応：Premiere Pro 24.0 and later; tested on 25.5

  65. Premiere Panel 1.3.0

    2026

    追加

    • The panel can lie as a horizontal strip: in a short frame the six buttons line up in one row, with only "?" on the left and the status line on the right.
    • In a narrow, tall column the panel takes minimal space: only "?" on top and the six buttons stacked, with no empty space in the corner; nothing is cut off on the right in the narrowest column.

    変更

    • Expand Nested Sequence no longer removes the nested sequence — its contents go onto free tracks above it, and the nested sequence itself is disabled (Shift+E enables it). Clips no longer jump several tracks up. If there are not enough tracks, the panel adds new ones on top.
    • If the second audio channel inside the nested sequence is cut differently from the first, or another sound sits on its track, Expand Nested Sequence refuses and explains what to fix: before, the first mic could come out in place of the second.
    • If the nested sequence's audio is trimmed differently from its video (a J or L cut), Expand Nested Sequence refuses and explains what to do: before, part of the audio could be lost.

    修正

    • If Expand Nested Sequence fails after Premiere has added tracks, the panel says how many were added: a script cannot delete empty tracks.
    • A sped-up or slowed-down clip from the middle of a long file comes out showing the same frames it showed inside the nested sequence.
    • If there is a title or graphic inside the nested sequence, the panel now says so — it used to wrongly blame the clip's speed.
    • A clip with keyframes now comes out of the nested sequence even when its speed is changed or the nested sequence trimmed its start: the motion is the same and on the same frames that were visible inside.
    • Two-channel audio at a changed speed now comes out of the nested sequence with both channels.
    • Video and audio are linked again after Expand Nested Sequence.
    • A fade at the edge of a clip inside the nested sequence becomes a smooth fade in or out.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  66. Hub by Sudorgin 1.7.0

    2026

    追加

    • Coming Soon now lists Palette: a command palette, any Premiere action by search and on a hotkey.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  67. RGB Panel 1.3.0

    2026

    追加

    • The panel can lie as a horizontal strip: in a short frame the colors line up in one row at full height, with only ☰ and "?" on the left.
    • In a narrow, tall column the panel takes minimal space: only ☰ and "?" on top, colors in one column; the title is no longer cut to "R…", and nothing is cut off on the right in the narrowest column.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  68. DaVinci WSF 1.2.0

    2026

    追加

    • Zoom speed-up with the wheel: the first finger swings are quiet, each next swing is faster, then the speed holds; after a pause it starts quiet again. On from the start; the settings have a switch and a Full speed slider.
    • Back at full speed: wheel down (zooming out) goes at full speed right away, with no quiet start. On from the start, can be turned off in the settings.

    変更

    • The settings are short now: only the zoom speed-up, full speed, Back at full speed, start with Windows, and the language are shown. The other scroll numbers are tuned for zooming in Resolve and are the same for everyone — including after an update, even if you changed them before.
    • Presets and Reverse Direction are gone: the wheel turns the usual way.

  69. SFX Machine 1.4.0

    2026

    追加

    • Settings now have an "Import Sounds…" button: choose several files at once, and each goes to its own pad in the current tab. If the tab already has sounds, the panel asks whether to create a new tab named after the folder or import into the current one.
    • Dozens of files import one by one with a counter, and the panel stays responsive. Sounds are copied to the panel's folder, so pads keep them even if the original files move. The "Find Sounds", "Export to Folder" and "Import from Folder" buttons moved to a separate "Library and Sharing…" window.

    変更

    • "Replace Selected": if the new sound is longer than the room before the next clip, it no longer refuses — it is trimmed at the end and placed, and the next clip stays untouched.
    • A sound at another speed that lacks room for the full file while its speed changes still leaves the old clip and explains why.
    • On an empty tab the second button is now "Import Sounds…" — it opens a choice of sound files on this computer. Importing previously exported pads is in Settings, "Library and Sharing…".

    修正

    • Settings and pad windows no longer show content peeking above the title and below the bottom buttons while scrolling.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  70. Binder 1.2.0

    2026

    修正

    • .jfif and .jpe images are now sorted into Photo instead of Other, and watch folders import them as images.
    • A bin holding your sequences now moves whole into Sequences instead of Other. If a bin mixes footage and sequences, it goes where most of its contents belong, and sequences from a footage bin move to a bin of the same name inside Sequences.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  71. Hub by Sudorgin 1.6.0

    2026

    変更

    • The Hub now opens right away with the cards as they were last time, and checks what is installed in the background. The window no longer freezes during downloads and checks.
    • The Hub no longer installs or updates anything on its own: purchased panels update only when you press "Update".
    • Panel errors no longer pile up as pink bars above the list: the Hub header now has a single red triangle.
    • It blinks until you open it, and inside there is one line per breakage: which button you pressed and what happened in Premiere, for example "Binder: the "Sort" button did not work — Premiere was busy", and how many times it happened. Background failures you never saw are not listed.
    • When nothing broke, there is no triangle.
    • The notice that Premiere closed with an error is now a line in the same list, not a separate bar above the cards.

    修正

    • Checking the files of installed panels no longer freezes the Hub window for tens of seconds and no longer starts a second time while the first check is running.
    • Cards and tiles in the Hub now fill the full width of the panel, with no empty space on the right. On a wide panel, cards are arranged in several columns.
    • "Try Again" after a failed return to an older version now installs that same older version again, not the latest one.
    • "Cancel" now stops a download right away, even before the site starts sending the file.
    • If Premiere is holding the panel folder, the Hub now says so and suggests restarting Premiere. If the disk runs out of space during install, the Hub says so instead of blaming permissions.
    • The Report a Problem button on a crash notice no longer erases text you already started typing: the ready description is added below it.
    • An effect already queued and waiting for a Premiere restart is no longer offered as an update again. The card and Updates say "Waiting for Premiere to restart", also after the Hub is closed and reopened. The install is not queued a second time.
    • "Return to version" and "Reinstall" on a product still waiting for a Premiere restart no longer do nothing silently: the Hub says the previous install is waiting for the restart.
    • After updating itself, the Hub no longer offers the same version again before Premiere restarts.
    • The Hub now only shows DaVinci WSF: it no longer installs, updates, or removes it. The program's own installer does that.
    • The Hub no longer gets cut off at the bottom when the panel is resized or moved elsewhere in Premiere. Notices, install rows, the purchase window, and the error window fit a narrow panel, and long paths wrap.
    • If the list fails to draw, you get the error window and a "Draw Again" button instead of a blank panel.
    • A panel opened from the Hub no longer breaks when the Hub is closed: it is now opened by an invisible background part of the Hub, not by the Hub window.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  72. Guillotine 1.2.1

    2026

    修正

    • On computers with an NVIDIA card but no CUDA installed, analysis no longer stops with "Sound analysis was interrupted" and runs on the graphics card: engine 1.0.1 ships the library it needs.
    • If the card cannot do the work (for example, not enough video memory), the engine notices before the analysis and switches to the CPU on its own.
    • When other programs take up most of the computer's memory, cutting no longer happens in plain view or jumps between tabs: the copy is cut out of sight and the finished sequence appears at the end.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  73. CutFixer 2.3.0

    2026

    修正

    • Hardened license verification.

  74. Retimer 2.3.0

    2026

    修正

    • Hardened license verification.

  75. DaVinci WSF 1.1.0

    2026

    修正

    • Hardened license verification.

  76. Guillotine 1.2.0

    2026

    追加

    • All three tabs now let you choose the model before a run: Standard or Strong, with how fast hours are spent shown next to it (monologue and dialogue ×1 or ×3, short videos ×2 or ×6).
    • The panel opens with the recommended one: standard for monologue and dialogue, strong for short videos; pick the other and a short tip appears below.
    • Shorts: Instructions for the Model became the Author Prompt — a large window of up to 8000 characters with an example and six named slots for different clients and channels; the selected one goes into the order. Your previous instructions move into the first slot.
    • The panel now carries a general editor's prompt: a clip is one whole subtopic, pieces in recording order, starting on the subject and ending on the conclusion.

    変更

    • Shorts: the strongest moments with a clear, catchy opening on any material; a video that starts mid-sentence is redone by the server. The empty prompt window shows short examples of how to steer the choice your way.
    • Shorts from a finished episode: by default one video per 80 seconds of speech, up to 30 videos (was one per 2 minutes, up to 20).
    • Everything Guillotine creates in the project is named in English whatever the panel language: the copy is "<name> Guillotine", shorts are "<name> Guillotine Shorts".
    • In Who Speaks, once the speakers are counted, there is one button — Next: it transcribes the recording and opens the next step; if the transcript is already there, it opens it right away. The separate Transcribe Now button is gone.
    • Under the pause settings you can see how much they remove and that the model does the main cut while editing; under the camera settings — how many shots the episode has and that they do not change the length.
    • Shorts are now built from short meaningful pieces of 3–20 seconds — a sentence or a complete part of a thought — instead of long phrases of up to several minutes. A clip can combine thoughts from different minutes of the recording, and this also works on a finished episode with no pauses.

    修正

    • In Dialogue, the microphone of the person talking is on even when a neighbour laughs louder or chimes in: each microphone switches on by its own person's voice and off in their silence. When people talk over each other, both are heard.
    • The transcript now listens to each person where they themselves are heard, so after the update the recording is transcribed again.
    • In Dialogue, the camera follows the person speaking words, not the loudest one: a neighbour's laughter no longer pulls the picture away from the speaker. When two people talk at once for more than a second and a half, the wide shot comes on.
    • In Dialogue, a line spoken right after someone else's phrase no longer sticks to it: the microphone and camera of the person talking are on, not those of the previous speaker.
    • In Dialogue, there are no more one- or two-frame pieces between cuts: a camera change, a microphone change and a splice that land within half a second of each other merge into a single cut.
    • Shorts: there is no one-frame stutter where two adjacent pieces of a clip join. In podcast shorts, a neighbour's voice no longer switches on someone else's microphone, and a wide shot recorded in several files no longer leaves black pieces.
    • The false "The model did not review this recording" no longer flashes during analysis in Monologue. Count Who Speaks no longer marks the schema steps as done like an edit does. The file count of a camera and a microphone's role are no longer cut off with an ellipsis.
    • Shorts: if fewer videos come back than ordered, the panel says "N of M videos" and why instead of staying silent. A finished episode in a single clip is recognised by its continuous speech, and duplicates are no longer searched for in it.
    • In Dialogue, a silent person's microphone no longer switches on from a neighbour's voice leaking into it, and the wide shot no longer appears where only one person is talking.
    • In Dialogue, the camera switches to the new speaker at the cut, not a second earlier while they are still silent. If the wide shot was recorded in several files, all of them are used: where the first ends, the next one takes over.
    • The warning about pieces with no picture names the empty spots in the sequence and the time of the first one.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  77. SFX Machine 1.3.0

    2026

    変更

    • Hardened protection: the part of the panel that runs inside Premiere now ships in compiled form.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  78. Binder 1.1.0

    2026

    追加

    • On the Intake tab, under "Auto-Sort via Incoming", a new "And Everything New in the Root" checkbox: clips dropped on the timeline, imports into the root, new sequences and Adjustment Layers go straight to Incoming, then into categories when its minutes run out. Bins are left alone. Off by default.
    • After you choose a folder, Binder asks how to connect it: "Everything in It" or "Only New from Now". With the second option, files already in the folder never go to the project, not even after restarting Premiere; only new files come in. Such a folder is marked "new only" in the list.
    • Each folder on the Intake tab now has its own "What to Import": the "Import" button in the folder's row, and for a new folder "What to Import" right in the "How to connect" question, before the first import.
    • Until it has its own setting, the folder follows the default; the first checkbox you change makes it its own, the row shows a "custom import" mark, and "Use Default" brings back the shared one. The top button is now "What to Import by Default" and leaves folders with their own setting alone.

    変更

    • Incoming now sorts out everything lying in it: not only files from watch folders, but also what was created right inside Incoming (Adjustment Layer, sequence, matte) or dropped there by hand. When the Incoming minutes run out, it moves into categories. Bins inside Incoming stay where they are.

    修正

    • Files that arrived in a watch folder while another project was open now land in Incoming when you return to the project instead of going straight into the folder's bin. Only what was already in the folder when you attached it with "Add Folder" goes straight to its place.
    • "Open Folder with Finished File": one window per render, and none while you are only choosing a location in the export dialog. After a window opens, the same folder will not open again for two minutes.
    • Connecting the same folder again no longer creates duplicates: if its files are already in the project, Binder offers "Continue" and adds only what is missing, while items sorted into categories stay put.
    • If Premiere doesn't report what is already in the project, the folder isn't connected blindly; Binder asks you to try again.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  79. Hub by Sudorgin 1.5.0

    2026

    修正

    • Key renewal started by the Retimer effect no longer erases SFX Machine's lock correction. Before, after such a renewal, Diversify with tone in SFX Machine sounded wrong until SFX Machine renewed its own key.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  80. RGB Panel 1.2.0

    2026

    変更

    • Hardened protection: the part of the panel that runs inside Premiere now ships in compiled form.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  81. Premiere Panel 1.2.0

    2026

    修正

    • Staircase no longer refuses with "not enough tracks" when two or more tracks have to be added: the panel adds as many as it needs.
    • Staircase now lays clips out in tiers, camera by camera: first clips stay, second clips go one tier up, third clips one more, each right above its own track, and the audio moves the same way. A clip joins the tier of the other cameras' clips playing at the same time.
    • Titles and sound effect tracks stay where they are. The camera order stays the same. Undo Staircase returns each clip and its audio to its own track, including after Clip → Synchronize; if that track is taken, the clip goes higher up, never onto another camera's track.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  82. SFX Machine 1.2.0

    2026

    修正

    • If you clicked a pad right after the panel opened, the first sound insert sometimes failed — the panel is now ready to work by the time it appears on screen.
    • Your pad tabs could disappear if antivirus or backup software held their file for a moment when the panel opened — the panel now reads the file again, and if that fails it overwrites nothing and tells you what to do.
    • Report a Problem no longer sends the locations of your files — only the drive and the extension of a path remain.
    • After replacing a drive or board in the computer, the panel asked for the key again a few days later — the renewal is now saved.
    • If purchase data did not arrive from the site, sounds could play wrong with no explanation — the panel now asks for it again on its own and, if that does not help, shows a line with a Refresh button.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  83. Hub by Sudorgin 1.4.2

    2026

    変更

    • Before installing an effect, the helper window now asks first: "Retimer 2.1.0 is ready to install" with Install and Cancel buttons. It stays on top of Premiere without taking the keyboard from it. The Windows permission prompt appears only after you press Install.
    • Cancel or the close button works like "No": the Hub says the install did not go through, and the card button is available again. The window keeps waiting for an answer even after Premiere is closed, and reopening the Hub brings it back to the front. The effect card says what to press.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  84. Hub by Sudorgin 1.4.1

    2026

    変更

    • The Hub installer now has its own icon — on the downloaded file, in the setup window, and in Windows "Apps". The file properties name Sudorgin as the company.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  85. Hub by Sudorgin 1.4.0

    2026

    変更

    • Effects are now installed and removed by our own Sudorgin Helper instead of PowerShell. Windows asks for permission right when you press "Update" or "Install", not hours later after Premiere closes, and the Windows prompt shows "Sudorgin Helper" with its own icon.
    • The Windows prompt and the helper window come up on top of Premiere instead of hiding on the taskbar. Before the prompt the Hub says whose it is and what to press. No black console window flashes anymore.
    • If you answer "No", the Hub says right away that the install did not go through, and the card button is available again. Uninstalling the Hub removes the helper too.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  86. CutFixer 2.2.0

    2026

    変更

    • New default settings: a transition is applied in "Play at real speed" mode, with smooth Strong easing in and out and motion blur switched on. Transitions already placed in saved projects keep their own settings.

    修正

    • A jerk on the first and last frame of the transition: motion blur near the edges no longer pushes the picture forward, and the last frame of the transition is the real frame of the second clip rather than a generated one.
    • A jerk on the way into and out of the transition: over a few frames at each edge the picture passes smoothly from the real frame to the generated one instead of jumping in a single frame. Both edge fixes also apply to transitions in saved projects: their edge frames become smoother.

  87. Retimer 2.2.0

    2026

    変更

    • The engine shared with CutFixer is updated: CutFixer now eases softly into and out of a transition. Retimer's picture is unchanged.

  88. Hub by Sudorgin 1.3.2

    2026

    変更

    • What got installed now shows in one green strip with a tick instead of a separate note per product. If more than three were installed at once, two lines show plus "N more" — click to see the rest. Anything that failed to install shows in its own pink strip.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  89. Guillotine 1.1.1

    2026

    修正

    • The panel did not open after entering a license key and asked to be reloaded.
    • The "no pauses" note after an edit in Dialogue no longer counts as a panel error: Hub by Sudorgin no longer shows a Guillotine error because of it.
    • After building shorts the panel again notices which sequence is open in Premiere — no need to reload it. Switching to another recording clears the previous shorts, track and analysis.
    • Transcribe in Who Speaks shows progress and stops with the Stop button. After Count Who Speaks the panel says there is no transcript yet.
    • In Dialogue, the note about talk without pauses no longer suggests running Guillotine on the original sequence.
    • In Dialogue, the new speaker's camera and microphone switch on at their first word, not half a second later: the start of a phrase no longer stays in a disabled clip.
    • In Dialogue, the model now reviews the whole conversation line by line instead of a few long chunks: on a forty-minute recording it used to see five chunks and could remove almost nothing. Pauses shorter than three seconds are still not cut.
    • Podcast shorts are assembled cleanly: no 2–3 frame clips where phrases join, only the mic of whoever is heard is on, a co-host's laugh is audible, and the shot changes at least every 15 seconds when there is another camera to cut to.
    • When a phrase is said several times, the edit and the shorts keep the last complete take, not one from the middle. An earlier take is kept only if the last one is cut off or has a slip.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  90. SFX Machine 1.1.1

    2026

    修正

    • The panel did not open after entering a license key and asked to be reloaded.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  91. Binder 1.0.2

    2026

    修正

    • The panel did not open after entering a license key and asked to be reloaded.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  92. Hub by Sudorgin 1.3.1

    2026

    修正

    • The note that an effect or the Hub was installed after Premiere closed is no longer red and no longer lingers for days: it clears itself after a day, and an old "1.1.0 installed" no longer pops up after reinstalling the Hub.
    • For the Hub itself it now says "Hub updated" instead of "the effect is already there". The note that the Hub failed to update goes away once that version is installed.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  93. DaVinci WSF 1.0.0

    2026

    追加

    • The program works with a key. Enter it right in its window (Key in the main window or Key… in the tray menu); the same place has a 3-day trial, Check Key, and Release This Computer to move the key to another machine.
    • Without a valid key smooth scrolling is off and the tray says Key Needed. Once a day the program confirms the key on the site by itself; offline it keeps working until a week runs out.
    • Report a Problem: a message to the author with your email and text, plus an archive to look into the problem — the log for three days, system details, the Resolve version, settings, and the program's crashes from the Windows event log.
    • Before sending you can see exactly what will go: the archive's file list and the system details. The key, email and user name are removed.
    • If the program closed with an error, on the next start it offers to send a report by itself: a "The Program Closed with an Error" window with the text filled in — just add your email. The crash details go into the report archive; the key, email and user name are removed.
    • When a new version comes out on the site, the program shows "New version X", and the key window gets a Download button.
    • Choose the language in the tray menu or in the settings. All windows switch at once, and the choice is kept after a restart.

    変更

    • A key entered on a new computer now moves there on its own — no need to release it on the old one first. A key can move up to 3 times in 30 days; after that, through support. The old computer says "The key was moved to another computer" at its next check.
    • The main window header now shows the author line: "by A.Sudorgin v<version>".
    • Starting the program a second time no longer opens a second copy — it shows the window of the one already running.
    • The installer closes the running program by itself before updating.
    • On first launch all program windows, the tray menu and the installer use the Windows language: Russian on a Russian system, English on all others.
    • Labels are clearer: the scrolling settings are wheel step, Glide time and Speed-up threshold, the curves are Sharp / Medium / Smooth / Linear, and every settings button and field has a tooltip. Your previous settings and chosen curve are kept.
    • The key window is more precise when the fault isn't yours: instead of "this doesn't look like a real key" it says "this is a fault on our side", and a paused key or an exhausted trial now get their own messages instead of a generic "something went wrong".

    修正

    • The program's page on the site (Buy, Download) opens in the program's language, including right after you switch the language in the tray. Before, without a connection to the site it always opened in Russian, and after a language switch it opened in the previous language.

  94. CutFixer 2.1.0

    2026

    追加

    • The last line of the effect settings is an inactive author line, "by A.Sudorgin v2.1.0". Effects in saved projects keep their settings.
    • The effect log records system details at every Premiere start: the effect version, Premiere, Windows, graphics cards with their drivers, and CUDA; after a crash it notes that the previous session broke off. One log in a crash report is enough to see what everything ran on.

    変更

    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.

    修正

    • In a long export with a valid key a single frame could come out with the demo text if antivirus or the key renewal held its file for a moment. A hold of up to five seconds no longer spoils the frame; if the file stays busy longer, frames are marked until it is free again.
    • The background key renewal starts more reliably: the system PowerShell is called by its full path and from the Hub folder, not by name from wherever.

  95. Retimer 2.1.0

    2026

    追加

    • The last line of the effect settings is an inactive author line, "by A.Sudorgin v2.1.0". Effects in saved projects keep their settings.
    • The effect log records system details at every Premiere start: the effect version, Premiere, Windows, graphics cards with their drivers, and CUDA; after a crash it notes that the previous session broke off. One log in a crash report is enough to see what everything ran on.

    変更

    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.

    修正

    • In a long export with a valid key a single frame could come out with the demo text if antivirus or the key renewal held its file for a moment. A hold of up to five seconds no longer spoils the frame; if the file stays busy longer, frames are marked until it is free again.
    • The background key renewal starts more reliably: the system PowerShell is called by its full path and from the Hub folder, not by name from wherever.

  96. Guillotine 1.1.0

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • One hour of recording a month is free. Without a key the panel offers "Get a Free Hour" instead of a 3-day trial: the button opens your account on the site, where you get a key after signing in and paste it into the panel like a bought one.
    • The hour comes back every month, for those who bought hours too; what is left of it shows in the key box.
    • If a recording needs more hours than you have, the panel does not start and says what it costs and what is left. Before, a long recording was analysed until the hours ran out, and part of them went on an edit that was never finished. Short videos cost double, and this is taken into account.
    • The transcription engine has its own installer and no longer needs Python or a model download: everything is inside. No graphics card is needed — it runs on the processor.
    • The panel works with the key from your email, like our other panels, and spends the hours of a plan bought on sudorgin.pro. A plan is a monthly subscription. When the hours run out, the panel says so and shows where to buy more.
    • The panel header shows how many hours are left, for example "Remaining: 5 h 20 min". The Plans button opens the Guillotine page on the site: buy the same plan again or another one, and the hours are added to the same key — no new key to enter.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language. The whole panel is in English: steps, tooltips, progress, error messages and the markers of short videos.

    変更

    • A key entered on a new computer now moves there on its own — no need to unlink it on the old one first. A key can move up to 3 times in 30 days; after that, through support. The old computer says "The key was moved to another computer" at its next check.
    • The panel header now shows the author line: "Guillotine by A.Sudorgin v<version>".
    • The engine installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.
    • Labels, tooltips and messages rewritten in plain language. Modes have the same names on every tab — Pauses Only and Pauses and Retakes; the tab is Short Videos, and the filler words box is now Breaths and "Um", after what it really removes. Every button and setting has a tooltip.
    • Error messages say what happened and what to press, without codes, and point to Report a Problem. Units match Premiere: s, ms, dB.
    • New panel look. Each format has its own color: Monologue amber, Dialogue light blue, Short Videos purple; switching formats recolors the panel smoothly. A new header shows the hours left with a live dot and "?", plus a new format switch with icons.
    • Steps are cards: the open step is highlighted, completed ones get a filled circle, and the dotted line reaches each step as soon as you open it.
    • Go back and the line returns to the open step while later completed steps keep their filled circles — the line shows where you are, the circles where you have been. Steps arrange themselves to the panel width: one column when narrow, two or three when wider.
    • The Refresh button is gone because it is no longer needed: the panel sees which sequence is open and notices added and removed clips and tracks. With no sequence open, the panel calmly asks you to open one and picks it up by itself. Switch to another recording and the previous All Done clears.
    • The same new look inside steps: track choice and "what to remove" are rows with a circle, checkboxes and fields are in the format color, and Edit and Build are large full-width buttons. In the short format the video length is one "30 — 120" row next to Number of Videos.
    • Warnings (such as "the model did not analyze the recording") sit on a red strip so you cannot miss them.
    • Edit progress is shown as tiles: each stage has its own tile that fills as work goes, with percentages next to it and "stage 2 of 3" on top. What is happening right now ("recognizing words", "3 of 8 windows analyzed") is a line next to Stop. On a narrow panel the tiles stack in a column.
    • When an edit or a short-video build finishes successfully, All Done stays on screen: all tiles are filled, with "before → after" below them (a list of videos for short videos). It stays until the next run, a format change or a settings change.
    • The panel opens with a key, like our other panels: a key window on first launch, then "?" → Key. The key field in the header is gone.
    • Every mode on every tab spends hours the same way, by recording length: model analysis, silence-only cutting and Pauses Only in Dialogue alike. Short videos cost double.
    • Work that failed (the model did not answer, the connection dropped, you pressed Stop) costs no hours: what was charged goes back to your balance. Retrying a window right after a failure is free.
    • A trial run on the first 5 minutes in modes without the model spends 5 minutes, not the whole recording.
    • The old pass is replaced with a key: the panel asks once for the key from your email. The previous panel version with the old pass works until November 1, 2026.
    • Short videos match the size of your recording: 4K gives vertical 2160×3840, 1080p gives 1080×1920 as before. Short videos take the sequence color settings (working color space, linear color, tone mapping) from the source; if something does not apply, the panel says so.

    修正

    • The "?" menu and the key window: "Version History" without Hub by Sudorgin and "Buy Key" open the Guillotine page in the panel's language; "Support" opens the contacts page on the site.
    • "Plans" opens the Guillotine page in the panel's language.
    • A suspended key is now named plainly: "This key is suspended. Contact support." — instead of "server busy", which made analysis retry in vain for about two minutes.
    • A panel left open for days without restarting Premiere now renews its key by itself once a day, so the "Check key" window no longer appears mid-work for someone who bought it.
    • The panel rides out a short analysis server outage on its own: it waits and retries up to five times, about two minutes, showing "Analysis server is not responding, waiting…". Stop interrupts the wait too.
    • If the model did not analyze the whole recording, the panel no longer edits it by halves. It says how many parts are analyzed and offers "Retry Missing Parts" — the retry asks only about the missing parts, and analyzed ones are kept and not paid for again — or "Edit As Is".
    • A recording with almost no pauses (for example, an already cut sequence) no longer fails with "version is out of date". A piece too long without pauses is not shown to the model, the rest is analyzed as usual, and the panel says so after editing.
    • If the site cannot read the panel's request, the key window says the fault is on our side and offers to report it, instead of saying a correct key "does not look like a real key".
    • If the trial or the key's period ends while the panel is open, it now shows the key window right away instead of answering every button with "Premiere is not responding".
    • Short videos now build from phone recordings too: a sequence from an iPhone clip (frame rates like 29.99 or 59.96) no longer fails with "non-standard frame rate" — the videos are built at the nearest standard rate, 30 or 59.94.
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer. The panel code in the release is now obfuscated, so reading or reworking it is pointless.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  97. SFX Machine 1.1.0

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language.
    • Clear All Pads in the ☰ menu: after a confirmation all tabs are replaced with one empty tab, as on first launch. Presets and sounds on disk stay.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.

    変更

    • The panel's main code no longer sits on disk in plain text — it is encrypted and unlocked by the key of your purchase or your trial. The first launch of a new version needs a connection to the site.
    • A key entered on a new computer now moves there on its own — no need to unlink it on the old one first. A key can move up to 3 times in 30 days; after that, through support. The old computer says "The key was moved to another computer" at its next check.
    • The header author line now reads "by A.Sudorgin" instead of "by Alexander Sudorgin".
    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.
    • The Settings, Diversify, pad set and pad settings windows fit a panel of any size: on a small panel they scroll, while the close buttons and the bottom row of buttons always stay visible. Menus and questions no longer go past the panel edge either.
    • A short panel always shows at least one row of pads; scroll to see the rest.
    • New look for the top of the panel: buttons in one style (the main one green, the rest glass), a Global Offset slider with the zero mark in the middle, custom checkboxes, neat tabs and ☰ and ⚙ buttons.
    • A long message at the bottom of the panel wraps to a second line and then ends with an ellipsis; hover to see all of it.
    • The header says "by Alexander Sudorgin" instead of "premiere". On a narrow panel the version number hides first, then the signature.
    • Labels and tooltips rewritten in plain language, one word for one thing: pad, tab, preset, Cycle, volume in dB. For example, the relink button is now Find Sounds, and the set export is Export to Folder.
    • Every button has a tooltip, every error says what to do next, and no raw error codes are shown anymore.
    • The panel's ≡ menu speaks the panel language.
    • New look for pads. The waveform is the same solid shape in the label color, but dark label colors are now lighter and easier to see.
    • The layers of one pad sit on top of each other in one view, each in its own color: the loudest at the bottom, quieter ones above it with a dark outline so the sounds do not blend; color stripes on the left show one per layer, and the "+N" badge is gone.
    • While a pad plays, its button shows "■" and stops the sound when pressed, and the pad is highlighted. After a successful insert the pad edge flashes briefly. A pad whose file is missing has a gray waveform.
    • The "±" sign is an amber square level with "▶", the pad tooltip is colored line by line, and the menu and palette look neater.
    • New look for pad settings and the Settings, Presets and Diversify windows. Card titles are in small capitals, and the first card now has a "sound" title. Fields and drop-down lists are inset and light up green while you type.
    • The onset marker shows its time above the bar, the part of the sound before the marker is highlighted, and the marker is easy to drag by its tab on top. The "±" spread sliders extend from the middle both ways: the handle on the right, its mirror on the left.
    • Variation in the Diversify window is amber, as in pad settings. The step chart has a legend for its colors, and the pitch line no longer hides under the volume line. The Open, Save Preset and Delete buttons sit in the preset list card.

    修正

    • The "?" menu and the key window: "Version History" without Hub by Sudorgin and "Buy Key" open the SFX Machine page in the panel's language instead of the home page; "Support" opens the contacts page on the site.
    • If the site cannot read the panel's request, the key window says the fault is on our side and offers to report it, instead of saying a correct key "does not look like a real key".
    • If the trial or the key's period ends while the panel is open, it now shows the key window right away instead of answering every button with "Premiere is not responding".
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer. The panel code in the release is now obfuscated, so reading or reworking it is pointless.
    • On a narrow Cycle pad the sound count is no longer cut off: the word is shortened with an ellipsis, and the number is always visible.
    • Premiere errors are again explained case by case instead of with one generic phrase.
    • The cursor no longer shows a busy circle during an insert: busy pads simply dim, as before.
    • The color picked on a Cycle pad now applies to all of its sounds, not just the first one.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  98. Binder 1.0.1

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • The Incoming delay is now any number of minutes from 1 to 1440 instead of the fixed "1 · 3 · 5 · 10".
    • Auto-Sort has its own minutes (0 means right away): new items in the project root wait that long before moving into categories. A sequence, Black Video, Color Matte or Adjustment Layer you have just created is no longer pulled away from under you.
    • Sort Project creates every category bin at once, even the empty ones, so the project structure is ready after the first click.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.

    変更

    • A key entered on a new computer now moves there on its own — no need to unlink it on the old one first. A key can move up to 3 times in 30 days; after that, through support. The old computer says "The key was moved to another computer" at its next check.
    • Labels and tooltips rewritten in plain language and made shorter; the minute fields, the palette "×" and the whole What to Import screen now have tooltips. The panel's right-click menu has plain item names.
    • Auto-Sort is now two independent checkboxes, and both can be on. On the Order tab, Auto-Sort with its own minutes sorts new items in the project root into categories (it replaces the Auto Mode switch).
    • On the Intake tab, Auto-Sort via Incoming with its own minutes first puts new files from intake folders into Incoming. Files you drop into the project by hand no longer go to Incoming — Auto-Sort handles them.
    • Both checkboxes survive a panel restart and start working when you open a project; closing the project does not reset the setting, it only pauses the work.
    • The Intake tab is simpler: the Sync and Sort Intake Folders buttons are gone — intake checks the folders by itself, and Auto-Sort or Sort Project sorts them. The "Incoming: N — Sort Now" button shows only when something is in Incoming.
    • Undo Sort works only right after Sort Project: any later action in the project, switching to another project or restarting the panel disables the button. In a new project the panel opens clean.
    • Tab order: Order, Intake, Output. The panel opens on Order.
    • What to Import defaults: video, audio and images are on; Premiere projects, subtitles and motion graphics are off. Filters you have already set stay as they are.
    • The panel header now reads "Binder by A.Sudorgin v<version>": the version number is back, and the signature matches the other plugins.

    修正

    • The "?" menu and the key window: "Version History" without Hub by Sudorgin and "Buy Key" open the Binder page in the panel's language; "Support" opens the contacts page on the site.
    • A panel left open for days without restarting Premiere now renews its key by itself once a day, so the "Check key" window no longer appears mid-work for someone who bought it.
    • "Buy Key" opens the Binder page on the site instead of the home page.
    • The "panel did not open" screen names the reason more precisely — no connection to the site or a newer version is out — and offers a "Report a Problem" button.
    • A site outage (a "not found" page or a block instead of an answer) no longer removes the key or says "key paused": the panel treats it as a temporary fault and offers to try again.
    • If the site cannot read the panel's request, the key window says the fault is on our side and offers to report it, instead of saying a correct key "does not look like a real key".
    • If the trial or the key's period ends while the panel is open, it now shows the key window right away instead of answering every button with "Premiere is not responding".
    • Removed development-only service files from the panel package.
    • While the panel checks the key at launch, it shows "Checking Key…" instead of staying blank.
    • While an intake folder is connected, Premiere no longer flashes progress windows during ordinary actions (such as sorting a column by date): the panel asks Premiere every three seconds instead of twice a second and no longer floods its log with the same line.
    • New files from the folder arrive just as fast.
    • The Incoming sort button no longer lights up over an empty bin: if you moved or deleted everything yourself, the panel notices.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  99. Hub by Sudorgin 1.3.0

    2026

    追加

    • Report a Problem in the Hub now attaches a report from the program the message is about: a panel's own logs, the effect log with graphics card and driver details for Retimer and CutFixer, the logs and settings for DaVinci WSF.
    • No paths, email or key; you can see what will be sent first, and a checkbox leaves the report out. The same button is in the Hub's own error window.
    • If a panel, an effect or Premiere itself closed with an error, the Hub asks on its next launch: "Binder closed with an error at 09:53. Send a report?". Nothing is sent until you press the button; the cross stops it asking about that crash. The Hub does not show crashes of other programs.
    • Coming Soon now lists Centurion: sync cameras and recorders right inside Premiere.
    • English: switch the language in the panel's ≡ menu or the "?" menu; on first launch the Hub follows the Premiere language. The program catalog, My Keys and the version history are in English too.
    • If the Hub or a paid panel is damaged, the Hub suggests reinstalling it, with a Reinstall button right on the product card.
    • A key paused by support, and a program version too old to use, now show their own plain message instead of a generic "key needed".
    • The Hub now installs a new version of a panel you bought as soon as it comes out, with no need to press Update. If that fails (no network, the panel is busy), the usual button stays. If you went back to an earlier version, the Hub does not reinstall the newer one by itself, only the next release.
    • Guillotine is still updated with the button, together with its engine.

    変更

    • DaVinci WSF's "Page" button opens its page on the site, even when the program is already installed.
    • For a paid panel, Version History no longer offers to go back to a version the site no longer issues a key for: that rollback would end in the "Update needed" window.
    • A key entered on a new computer now moves there on its own — no need to unlink it on the old one first. A key can move up to 3 times in 30 days; after that, through support. The old computer says "The key was moved to another computer" at its next check.
    • The My Keys hints no longer ask you to release the key "there".
    • The header now shows the author line and version: "Hub by A.Sudorgin v<version>".
    • Labels and messages rewritten in plain language with the same words across Hub by Sudorgin: Check Key for a key, "Update to 1.3" for a new version, a clear trial countdown, and Report a Problem. Technical codes are gone from messages.
    • Every button, tab and field now has a tooltip: hover to see what it does.
    • Program descriptions in the catalog use the same words as the programs themselves.
    • The panel menus (right-click and ≡) no longer have the Reload item.
    • The installer's message about a working copy is translated too.
    • On Windows in a language other than Russian or English, the installer now speaks English instead of Russian.

    修正

    • "Support on the Site" and "Support" in the key window open the contacts page in the Hub by Sudorgin language instead of the home page.
    • When the computer's date or time is off, the product row now says "check the date" instead of "key not accepted": the key is fine and works again once the clock is fixed.
    • The daily key renewal no longer stops when one product's key file is busy: the other products are still renewed, and the failure is written to the log.
    • The Guillotine purchase window no longer promises a 3-day trial it doesn't have: the button is now "Get a Free Hour" — a free key with one hour of work every month.
    • A panel left open for days without restarting Premiere now renews its key by itself once a day, so the "Check key" window no longer appears mid-work for someone who bought it.
    • A site outage (a "not found" page or a block instead of an answer) no longer removes the key from your computer: the Hub treats it as a temporary fault, and the key keeps working.
    • If the site cannot read the request, the Hub says the fault is on our side and offers to report it, instead of saying a correct key "does not look like a real key".
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  100. Premiere Panel 1.1.0

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.

    変更

    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.
    • Labels and tooltips rewritten in plain language and made shorter: for example, "Unknown result" is now "Panel did not understand Premiere's response" with advice on what to do, and messages say "nested sequence" instead of "Nest".
    • The panel's right-click menu has plain item names: Refresh Panel, Restart Panel.
    • The panel header now reads "Premiere Panel by A.Sudorgin v<version>": the full version number instead of a single digit, and the signature matches the other plugins.
    • The ≡ button with an empty settings sheet: the panel has no settings yet.

    修正

    • The "?" menu: "Version History" without Hub by Sudorgin opens the Premiere Panel page in the panel's language instead of the home page; "Support" opens the contacts page on the site.
    • In the "could not check" message two sentences ran together without a space.
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer. The panel code in the release is now obfuscated.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  101. RGB Panel 1.1.0

    2026

    追加

    • Report a Problem: a report on how the panel ran is attached to the message — you see what will be sent and can leave it out.
    • English: switch the language in the panel's ≡ menu; on first launch the panel follows the Premiere language. The main window, RGB Picker and RGB Presets switch together.
    • On launch the panel checks that its files are unchanged and suggests reinstalling through the Hub if something does not match what we released.

    変更

    • Header credit now reads "by A.Sudorgin" followed by the version, like all our plugins.
    • The installer speaks English on any Windows except a Russian one; before, it was in Russian on German, French and other systems.
    • Labels and tooltips rewritten in plain language: every button and field now has a tooltip saying what it does — for example, Load warns that all ten colors will be replaced with the preset's colors. In the presets window the button has the same name as in the panel: Save.
    • The right-click menu no longer has the Reload item, after which the panel could behave unpredictably. The picker and presets windows now have titles: RGB Picker and RGB Presets.

    修正

    • The "?" menu: "Version History" without Hub by Sudorgin opens the RGB Panel page in the panel's language instead of the home page; "Support" opens the contacts page on the site.
    • Removed a service file from the panel package that opened a debugger port into the panel on your computer. The panel code in the release is now obfuscated.

    対応：Premiere Pro 24.0 and later; tested on 25.5

  102. Hub by Sudorgin 1.2.0

    2026

    修正

    • «Обновить» у хаба ставит новую версию сразу: перезапустили Premiere — внизу уже новая. Раньше обновление ждало, пока Premiere закроется до конца, и открытый на минуту раньше Premiere показывал старую версию без единого слова.
    • Если хаб всё же пришлось обновлять после закрытия Premiere, он об этом говорит: при открытии — строкой «Обновление хаба ещё ждёт…» с тем, что сделать.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  103. Hub by Sudorgin 1.1.0

    2026

    変更

    • У каждого товара одна кнопка: «Открыть», если он стоит, «Попробовать» у платного, «Установить» у бесплатного. Страница на сайте — маленьким значком рядом.
    • Всё про обновления собрано в одном месте: жёлтая кнопка «Обновления» в шапке появляется, когда что-то вышло, и показывает, что пришло, что в нём нового, «Обновить» и «Обновить всё». Хаб обновляется оттуда же. Полос про обновления над вкладками и кнопки «Обновить хаб» больше нет.
    • Вышедшее обновление отмечено жёлтой точкой у плагина и на его вкладке.
    • Версии показываются коротко: «1.1» вместо «1.1.0».
    • «Проверить обновления» — значком в шапке; счётчика плагинов в шапке больше нет.
    • DaVinci WSF показан как витрина: без ключа и версии.
    • Платный плагин, которого ещё нет на компьютере, ставится из окна «Попробовать»: там появилась кнопка «Установить».

    修正

    • На средней ширине панели кнопки больше не наезжают на соседей и названия не пропадают: вторая колонка появляется, только когда строка в неё влезает целиком. В плитках эффектов кнопка стоит под названием во всю ширину.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  104. CutFixer 2.0.0

    2026

    追加

    • Without a valid key CutFixer runs as a demo: the transition is built in full, but the frame is darkened and covered with "DEMO · sudorgin.pro" across its entire area. Enter the key in the Hub app, restart Premiere, and the text is gone.
    • The key is checked on your computer; once a week Hub renews the permission over the internet, and after more than a week offline the frame carries the DEMO text again.
    • Its own installer: sets up CutFixer with one button and shows in "Add or remove programs" with its version number. While Premiere, Media Encoder or After Effects is open, the installer asks you to close them. CutFixer and Retimer share files: removing one effect does not break the other.

    変更

    • On a computer without an NVIDIA graphics card CutFixer now builds a real transition instead of a plain dissolve. The processor does the work, so it is slower: about 1.3 times on Full HD and 2.8 times on 4K.

  105. Retimer 2.0.0

    2026

    追加

    • Without a valid key Retimer runs as a demo: the whole picture is computed, but the frame is darkened and covered with "DEMO · sudorgin.pro" across its entire area. Enter the key in the Hub app, restart Premiere, and the text is gone.
    • The key is checked on your computer; once a week Hub renews the permission over the internet, and after more than a week offline the frame carries the DEMO text again.
    • Its own installer: sets up Retimer with one button and shows in "Add or remove programs" with its version number. While Premiere, Media Encoder or After Effects is open, the installer asks you to close them. Retimer and CutFixer share files: removing one effect does not break the other.

  106. Guillotine 1.0.0

    2026

    追加

    • The first version of Guillotine: the panel cleans up a talking-head recording by itself. Press Edit and the pauses are gone, and if you want, retakes, remarks to the camera operator and abandoned phrases too.
    • The result arrives as a new sequence next to yours; your own sequence stays untouched.
    • The panel sees the open sequence and its audio tracks by itself and guesses which one is a separate microphone and which is the camera sound.
    • Three formats: Monologue, Dialogue and Short Format.
    • Monologue: Silence Only, or Silence and Retakes, where the model reads the transcript and keeps one take out of the repeats. A Pauses slider in words and a switch for breaths and mumbling.
    • Dialogue: the camera of whoever is speaking is on screen and their microphone is heard. A What to Remove step: Pauses Only, or Pauses, Retakes and Talk with the Operator.
    • Short Format: the model builds vertical clips from the recording — 3 to 20 depending on the speech length, or as many as you enter. A Model Instructions field up to 1000 characters: what the channel is about, who watches it, what to take. Clips can also be cut from an already edited episode.
    • Analysis hours are spent only on finished work: if a run fails, the hours come back.
    • A "?" button in the header: report a bug (with your email and the panel log), version history, support and plugin info. The error window has a Send Report button.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  107. Hub by Sudorgin 1.0.0

    2026

    追加

    • Хаб понимает витрину сайта в новом виде: номера товаров, цены в рублях и долларах, разделы, пробу, пакеты часов, заметки к версии и строку «Поддерживает».
    • У каждого платного плагина в строке — ключ и его состояние словами: «ключ действует», «проба: 2 дн.», «нет ключа», «на другом ПК», «нужен интернет». Нажатие открывает окно ключа, как в самих панелях; кончающаяся проба — жёлтая. У Guillotine вместо этого — сколько часов осталось.
    • Под DaVinci WSF подписано, что это программа для DaVinci Resolve и только для Windows.
    • Каждая скачанная сборка проверяется печатью мастерской; без печати хаб сам не качает, а ведёт на страницу товара. Хаб запоминает, какой плагин поставлен и какую самую свежую версию он видел, и не ставит сборку другого плагина под чужим именем и версию старше уже виденной.
    • Эффекты Retimer и CutFixer хаб ставит, обновляет и удаляет сам: «Retimer поставится, когда вы закроете Premiere» — после выхода Premiere всё идёт тихо, с одним вопросом Windows о правах. Версии эффектов, DaVinci WSF и движка хаб берёт из «Установки и удаления программ».
    • DaVinci WSF: «Открыть» запускает программу, «Удалить» открывает её программу удаления; ставится для текущего пользователя, без прав администратора.
    • После установки Guillotine хаб сразу ставит её движок.
    • Старые копии панелей (Quick SFX, Fast Adjustment, Colour Checker, SORTER, Watcher) хаб показывает строкой «Старая копия» с кнопкой «Удалить».
    • Ключи эффектов продлеваются и без открытого хаба: эффект сам запускает скрытый скрипт продления, когда до конца проверки остаётся меньше двух суток.
    • Зелёная точка у плагина и на его вкладке, когда для него вышло обновление, и строка «Вышли обновления: …» — один раз на каждую новую версию.
    • «Обновить хаб»: когда выходит новая версия самого хаба, кнопка в шапке мигает; хаб скачивает свой установщик, проверяет печать и обновляется, когда вы закроете Premiere. «Обновить всё» обновляет и хаб.
    • Установщик хаба: ставится для текущего пользователя, без прав администратора, виден в «Установке и удалении программ».
    • «История версий» у каждого плагина: все вышедшие версии с датой, что добавлено, изменено и исправлено, и какие Premiere поддерживаются. Открывается из раскрытой карточки и из кнопки «?» → «История версий» в самих панелях.
    • Откат: «Установить эту версию» у прошлых версий — хаб спрашивает «Вернуться на …? Новые версии будут предлагаться снова» и ставит прошлую версию, проверив печать. Без интернета у панелей есть «Вернуть предыдущую с этого компьютера».

    変更

    • Поле ключа убрано из раскрытой карточки — ключ вводится в окне, которое открывается значком ключа. CutFixer продаётся отдельно, со своим ключом.
    • Ключи проверяются боевым ключом сайта; товары называются сайту своими номерами — прежние пробные записи ключей на машине разработчика больше не читаются.
    • Запись ключа на диск защищена от одновременной записи из хаба и из панели; раз в сутки продлеваются ключи всех наших программ на компьютере.
    • Обновления хаб узнаёт одним запросом на все программы: при открытии — если прошлой проверке больше часа, и кнопкой «↻ Проверить» (бывшая «Обновить») — не чаще раза в 15 минут.

    修正

    • Скачивание больше не обрывается на переадресации сайта в облако с файлами.
    • Вкладку и цену товара задаёт сайт: Guillotine переехал из «Скоро» в «Плагины», CutFixer стал отдельным платным товаром.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  108. Binder 1.0.0

    2026

    追加

    • The first version of Binder — one panel instead of Watcher and SORTER. A folder on disk arrives in a project bin by itself, Sort Project spreads the root into 10 colored categories, Undo Sort rolls the sorting back, and after a render the folder with the finished file opens.
    • The Incoming bin: new files from intake folders land in it first, in the project root, so you can put them on the timeline right away. After the chosen time (1 to 10 minutes, or by a button) they move to their place by themselves, and the clip on the timeline stays untouched. Off by default.
    • A "?" button in the header: report a bug (with your email and the panel log), version history, support and plugin info. The error window has a Send Report button.
    • Without a key the panel opens with the key window: enter a key or start the trial right in Binder.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  109. RGB Panel 1.0.1

    2026

    追加

    • Кнопка «?» в шапке: сообщить об ошибке (с почтой и журналом панели), история версий, поддержка, сведения о плагине. В окне ошибки появилась кнопка «Отправить репорт».

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  110. SFX Machine 1.0.0

    2026

    追加

    • The first version of SFX Machine on a new foundation.
    • A "?" button in the header: report a bug (with your email and the panel log), version history, support and plugin info. The error window has a Send Report button.
    • Without a key the panel opens with the key window: enter a key or start the trial right in SFX Machine.

    変更

    • The panel is called SFX Machine, the same as in the Premiere Window → Extensions menu.
    • Pads, tabs and presets from the previous version move over by themselves on first launch; the old folder stays on disk untouched.
    • Sounds go into the "SFX Machine" bin. In a project that already has a "QuickSFX" bin, the panel keeps using it.
    • Nested sequences made from layers are named "SFX Machine …".

    対応：Premiere Pro 24.0 and newer; tested on 25.5

  111. Premiere Panel 1.0.0

    2026

    追加

    • The first version of Premiere Panel — six buttons for timeline chores: an adjustment layer over the selection, closing gaps between selected clips without shifting the sequence, Staircase for syncing cameras by sound, Undo Staircase, expanding a nested sequence with effects, and a pre-export check.
    • Below the buttons, a result line says what was done, or, on refusal, what is in the way and what to do.
    • A "?" button in the header: report a bug (with your email and the panel log), version history, support and plugin info. The error window has a Send Report button.

    対応：Premiere Pro 24.0 и новее; проверено на 25.5

  112. RGB Panel 1.0.0

    2026

    Первая версия RGB Panel в Hub by Sudorgin.

    Десять слотов цвета, круг оттенков и экранная пипетка прямо в Premiere; пресеты сохраняются.

    Кнопка «?» в шапке панели: сообщить об ошибке, посмотреть историю версий, написать в поддержку.